Michiyo: Clean up Markdown artifacts from DokuWiki migration

2026-08-24T20:28:28Z

Clean up Markdown artifacts from DokuWiki migration

imported>OCDoc Import: Imported from legacy OpenComputers documentation at ocdoc.cil.li

2026-08-24T08:08:27Z

Imported from legacy OpenComputers documentation at ocdoc.cil.li

New page

= OC Tutorial: Hard Drives =

When [[Tutorial/oc2 writing code|writing programs]] you'll usually want to have your programs stick around, so the `/tmp` folder is no long-term solution. Enter [[Item/hdd|hard drives]]. When you put a hard drive into a computer it will be automatically mounted in the `/mnt` folder, named after the first letters of its address. While this may be enough for experimenting, you'll want more flexibility and comfort after a while. This tutorial will introduce the concept of labeling and mounting hard drives.

''Note'': all concepts in this tutorial also apply to [[Item/floppy|floppy disks]].

First, insert a fresh hard drive into a computer:

[[File:https://i.imgur.com/Nr81Dx2.png|700px|https://i.imgur.com/Nr81Dx2.png]]

You'll notice in the tooltip of the hard drive that it has been assigned an address (that shortened, alpha-numeric string). You don't have to remember that, it's just there for reference. Next, open the screen's GUI and type `df`. This program lists all present file systems and their current mount points. Among them you'll notice one that's only known by address (unlike the ROM and temporary file system). That should be the address you saw in the tooltip, earlier.

[[File:https://i.imgur.com/22yfaRh.png|700px|https://i.imgur.com/22yfaRh.png]]

What we want to do now, is to assign a name to our hard drive, so we don't have to reference it by address all the time. Run `label` to get the usage information of the labeling program. We'll use the `-a` option here, but you could also label it by providing the path to its default mount point in the `/mnt` folder. Run the program with the desired parameters, i.e. name the disk as you'd like. Note that the `92a` in the screen shot is the beginning of the hard drive's address. For most programs that need an address you can abbreviate the address, as long as it's still unique among the other components connected to the computer.

Once you've named your hard disk that name is also shown in the hard disk's tooltip. Run `df` again to verify the hard disk is now named:

[[File:https://i.imgur.com/X1ws656.png|700px|https://i.imgur.com/X1ws656.png]]

We can now mount the hard drive while referring to it by name. Type `mount <label> <path>` to mount the hard drive with the specified label at the specified path. Hard drives can be mounted in multiple locations, so doing that will not invalidate the default mount in the `/mnt` folder.

Now, computers do not store any state across reboots. Meaning if you shut down or reboot your computer, it crashes or runs out of power, you'll have to mount your disk again after restarting. This can get annoying very quickly, so let's create an autorun script that mounts the disk for us when it is inserted. Every hard drive can have such an autorun script. It has to be named `autorun` or `autorun.lua` and must be in the root of the hard drives folder structure. This script is automatically executed when the disk is installed in a computer - unless you disable autorun via the [[API/filesystem|the file system API]].

Switch into your freshly mounted folder, and run `edit autorun.lua`.

[[File:https://i.imgur.com/QYgrS3z.png|700px|https://i.imgur.com/QYgrS3z.png]]

Autorun scripts get the proxy of the storage medium they're on as their first parameter, so we can use Lua's varargs syntax to access it. We'll pass that to the `fs.mount()` function, which you find documented in [[API/filesystem|the file system API]].

[[File:https://i.imgur.com/J5inxhI.png|700px|https://i.imgur.com/J5inxhI.png]]

Save that file and close it. After removing the hard disk from the computer and inserting it again, run `ls` and you should see the disk has been automatically mounted again.

[[File:https://i.imgur.com/Us0kTvl.png|700px|https://i.imgur.com/Us0kTvl.png]]

== Contents ==

{{:Tutorial/contents}}

← Older revision		Revision as of 20:28, 24 August 2026
Line 1:		Line 1:
	= OC Tutorial: Hard Drives =		= OC Tutorial: Hard Drives =

	When [[Tutorial/oc2 writing code\|writing programs]] you'll usually want to have your programs stick around, so the `/tmp` folder is no long-term solution. Enter [[Item/hdd\|hard drives]]. When you put a hard drive into a computer it will be automatically mounted in the `/mnt` folder, named after the first letters of its address. While this may be enough for experimenting, you'll want more flexibility and comfort after a while. This tutorial will introduce the concept of labeling and mounting hard drives.		When [[Tutorial/oc2 writing code\|writing programs]] you'll usually want to have your programs stick around, so the <code>/tmp</code> folder is no long-term solution. Enter [[Item/hdd\|hard drives]]. When you put a hard drive into a computer it will be automatically mounted in the <code>/mnt</code> folder, named after the first letters of its address. While this may be enough for experimenting, you'll want more flexibility and comfort after a while. This tutorial will introduce the concept of labeling and mounting hard drives.

	''Note'': all concepts in this tutorial also apply to [[Item/floppy\|floppy disks]].		''Note'': all concepts in this tutorial also apply to [[Item/floppy\|floppy disks]].
Line 9:		Line 9:
	[[File:https://i.imgur.com/Nr81Dx2.png\|700px\|https://i.imgur.com/Nr81Dx2.png]]		[[File:https://i.imgur.com/Nr81Dx2.png\|700px\|https://i.imgur.com/Nr81Dx2.png]]

	You'll notice in the tooltip of the hard drive that it has been assigned an address (that shortened, alpha-numeric string). You don't have to remember that, it's just there for reference. Next, open the screen's GUI and type `df`. This program lists all present file systems and their current mount points. Among them you'll notice one that's only known by address (unlike the ROM and temporary file system). That should be the address you saw in the tooltip, earlier.		You'll notice in the tooltip of the hard drive that it has been assigned an address (that shortened, alpha-numeric string). You don't have to remember that, it's just there for reference. Next, open the screen's GUI and type <code>df</code>. This program lists all present file systems and their current mount points. Among them you'll notice one that's only known by address (unlike the ROM and temporary file system). That should be the address you saw in the tooltip, earlier.

	[[File:https://i.imgur.com/22yfaRh.png\|700px\|https://i.imgur.com/22yfaRh.png]]		[[File:https://i.imgur.com/22yfaRh.png\|700px\|https://i.imgur.com/22yfaRh.png]]

	What we want to do now, is to assign a name to our hard drive, so we don't have to reference it by address all the time. Run `label` to get the usage information of the labeling program. We'll use the `-a` option here, but you could also label it by providing the path to its default mount point in the `/mnt` folder. Run the program with the desired parameters, i.e. name the disk as you'd like. Note that the `92a` in the screen shot is the beginning of the hard drive's address. For most programs that need an address you can abbreviate the address, as long as it's still unique among the other components connected to the computer.		What we want to do now, is to assign a name to our hard drive, so we don't have to reference it by address all the time. Run <code>label</code> to get the usage information of the labeling program. We'll use the <code>-a</code> option here, but you could also label it by providing the path to its default mount point in the <code>/mnt</code> folder. Run the program with the desired parameters, i.e. name the disk as you'd like. Note that the <code>92a</code> in the screen shot is the beginning of the hard drive's address. For most programs that need an address you can abbreviate the address, as long as it's still unique among the other components connected to the computer.

	Once you've named your hard disk that name is also shown in the hard disk's tooltip. Run `df` again to verify the hard disk is now named:		Once you've named your hard disk that name is also shown in the hard disk's tooltip. Run <code>df</code> again to verify the hard disk is now named:

	[[File:https://i.imgur.com/X1ws656.png\|700px\|https://i.imgur.com/X1ws656.png]]		[[File:https://i.imgur.com/X1ws656.png\|700px\|https://i.imgur.com/X1ws656.png]]

	We can now mount the hard drive while referring to it by name. Type `mount <label> <~~path~~>` to mount the hard drive with the specified label at the specified path. Hard drives can be mounted in multiple locations, so doing that will not invalidate the default mount in the `/mnt` folder.		We can now mount the hard drive while referring to it by name. Type <code>mount <label> <path></code> to mount the hard drive with the specified label at the specified path. Hard drives can be mounted in multiple locations, so doing that will not invalidate the default mount in the <code>/mnt</code> folder.

	Now, computers do not store any state across reboots. Meaning if you shut down or reboot your computer, it crashes or runs out of power, you'll have to mount your disk again after restarting. This can get annoying very quickly, so let's create an autorun script that mounts the disk for us when it is inserted. Every hard drive can have such an autorun script. It has to be named `autorun` or `autorun.lua` and must be in the root of the hard drives folder structure. This script is automatically executed when the disk is installed in a computer - unless you disable autorun via the [[API/filesystem\|the file system API]].		Now, computers do not store any state across reboots. Meaning if you shut down or reboot your computer, it crashes or runs out of power, you'll have to mount your disk again after restarting. This can get annoying very quickly, so let's create an autorun script that mounts the disk for us when it is inserted. Every hard drive can have such an autorun script. It has to be named <code>autorun</code> or <code>autorun.lua</code> and must be in the root of the hard drives folder structure. This script is automatically executed when the disk is installed in a computer - unless you disable autorun via the [[API/filesystem\|the file system API]].

	Switch into your freshly mounted folder, and run `edit autorun.lua`.		Switch into your freshly mounted folder, and run <code>edit autorun.lua</code>.

	[[File:https://i.imgur.com/QYgrS3z.png\|700px\|https://i.imgur.com/QYgrS3z.png]]		[[File:https://i.imgur.com/QYgrS3z.png\|700px\|https://i.imgur.com/QYgrS3z.png]]

	Autorun scripts get the proxy of the storage medium they're on as their first parameter, so we can use Lua's varargs syntax to access it. We'll pass that to the `fs.mount()` function, which you find documented in [[API/filesystem\|the file system API]].		Autorun scripts get the proxy of the storage medium they're on as their first parameter, so we can use Lua's varargs syntax to access it. We'll pass that to the <code>fs.mount()</code> function, which you find documented in [[API/filesystem\|the file system API]].

	[[File:https://i.imgur.com/J5inxhI.png\|700px\|https://i.imgur.com/J5inxhI.png]]		[[File:https://i.imgur.com/J5inxhI.png\|700px\|https://i.imgur.com/J5inxhI.png]]

	Save that file and close it. After removing the hard disk from the computer and inserting it again, run `ls` and you should see the disk has been automatically mounted again.		Save that file and close it. After removing the hard disk from the computer and inserting it again, run <code>ls</code> and you should see the disk has been automatically mounted again.

	[[File:https://i.imgur.com/Us0kTvl.png\|700px\|https://i.imgur.com/Us0kTvl.png]]		[[File:https://i.imgur.com/Us0kTvl.png\|700px\|https://i.imgur.com/Us0kTvl.png]]
Line 38:		Line 38:

	{{:Tutorial/contents}}		{{:Tutorial/contents}}

Tutorial/oc3 hard drives - Revision history

Michiyo: Clean up Markdown artifacts from DokuWiki migration

imported>OCDoc Import: Imported from legacy OpenComputers documentation at ocdoc.cil.li